F13Warning
Maytag Oven/Range F13 Error Code
The oven temperature sensor signal is out of range, indicating a sensor failure.
Common causes
- Faulty oven temperature sensor
- Wiring issue
- Control board failure
How to fix it
- Power cycle the range by turning off the breaker for 5 minutes.
- Remove the oven temperature sensor and inspect for damage.
- Use a multimeter to check sensor resistance; compare to spec (typically ~1100 ohms at 70°F).
- If resistance is incorrect, replace the sensor.
⚠ When to call a pro: If sensor tests good but error continues, the control board may be defective.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.