E96Serious
Electrolux Dishwasher E96 Error Code
The drain pump relay on the control board has failed, preventing proper drain operation.
Common causes
- Stuck relay on the main board
- Short in the drain pump circuit
- Control board defect
How to fix it
- Perform a full power reset (unplug for 10 minutes).
- Check the drain pump connector for damage.
- Manually test the drain pump by applying direct power (if skilled).
⚠ When to call a pro: If the pump works manually but not via control, the board is likely faulty.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.