F08Serious
Whirlpool Dryer F08 Error Code
The heating element is not functioning or there is an open circuit in the heater assembly.
Common causes
- Broken heating element
- Blown thermal fuse or high-limit thermostat
- Loose wire connections to heater
How to fix it
- Unplug dryer and remove rear panel to access heater.
- Check heating element for visible breaks (use multimeter for continuity).
- Test thermal fuse and high-limit thermostat for continuity (should be closed).
⚠ When to call a pro: If element and fuses test good but code persists, control board may be faulty.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.