F35Serious
Kenmore Washer F35 Error Code
The pressure switch circuit is shorted, indicating a wiring fault or failed sensor.
Common causes
- Pinched or shorted wires in harness
- Water intrusion in the pressure switch connector
- Faulty pressure switch
How to fix it
- Unplug the washer and inspect the pressure switch wiring for signs of shorting (melted insulation, bare wires).
- Check for moisture or corrosion at the connector.
⚠ When to call a pro: If visual inspection reveals no obvious short, the pressure switch or control board likely needs replacement. Call a tech.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.