F10Warning
Electrolux Oven/Range F10 Error Code
The oven temperature sensor reading is out of range, often due to a faulty sensor or wiring.
Common causes
- Defective temperature sensor
- Loose or damaged wiring
- Faulty control board
How to fix it
- Check sensor connector at control board for tight fit.
- Inspect wires for damage.
- Measure sensor resistance; should be about 1100 ohms at room temperature.
⚠ When to call a pro: If sensor resistance is correct but code remains, control board may be bad; call technician.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.