F1Warning
Electrolux Oven/Range F1 Error Code
The oven temperature sensor circuit is open, preventing the oven from sensing temperature correctly.
Common causes
- Faulty oven temperature sensor (RTD)
- Loose or damaged wiring to sensor
- Faulty control board
How to fix it
- Unplug oven or turn off breaker.
- Remove rear panel to access sensor wires (usually behind oven).
- Check for loose or disconnected wires at sensor and control board.
- Measure sensor resistance with multimeter: should be ~1100 ohms at room temp.
⚠ When to call a pro: If resistance is out of range or wires are intact but code persists, call a technician.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.