F8E4Warning
Maytag Dishwasher F8E4 Error Code
The drain pump is drawing too much current or is stuck, preventing drainage.
Common causes
- Hard object jammed in drain pump impeller
- Seized pump bearings
- Drain pump motor failure
- Partial clog in pump housing
How to fix it
- Turn off power and remove drain pump cover/sump.
- Manually rotate impeller to dislodge debris.
- Check for broken glass or bone fragments.
- Test pump motor continuity (should be low ohms).
⚠ When to call a pro: If pump is jammed and cannot be freed, or motor tests open, replace the drain pump.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.