E6Serious
Haier Dishwasher E6 Error Code
The wash motor fails to run or stops unexpectedly during a cycle.
Common causes
- Obstruction in pump impeller (e.g., glass, bone)
- Wash motor winding open or shorted
- Run capacitor failure (if applicable)
- Motor control board or relay issue
How to fix it
- Turn off power and water, remove lower panel.
- Check the motor's impeller for debris (access through sump area).
- Rotate the motor shaft by hand to see if it spins freely.
- Test motor winding resistance with a multimeter (refer to service manual for values).
⚠ When to call a pro: If motor is seized or electrical values are abnormal, replacement by a technician is recommended.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.