F24Warning
Hotpoint Washer F24 Error Code
The water temperature is higher than expected for the current cycle.
Common causes
- Heater stuck on
- Thermistor failure reading low
- Control board relay issue
How to fix it
- Unplug the washer and wait for water to cool
- Check heater relay on control board for stuck contacts
- Test thermistor resistance (should increase as temperature drops)
⚠ When to call a pro: If water is hot when it shouldn't be
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.