E8Warning
Haier Washer E8 Error Code
The thermistor that measures water temperature is faulty or has a connection issue.
Common causes
- Defective thermistor
- Loose or corroded connector
- Short or open circuit in sensor wiring
How to fix it
- Unplug washer and check thermistor connector.
- Measure resistance at room temperature (should be around 10-50 kOhms).
- Replace thermistor if out of spec.
⚠ When to call a pro: If sensor readings are erratic or error code stays on.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.